- Job Summary
- Responsibilities and Functions
- Install, troubleshoot, repair, and maintain building and facilities related equipment
- Responsible for preventative/corrective maintenance on facilities equipment (i.e., compressors, vac pumps, exhaust fans, air handlers, vents, fan coil units, water coolers, refrigerators, ice machines, etc.) in accordance with manufacturer specifications.
- Responsible for preventative maintenance activities on HVAC equipment and building equipment including changing filters, cleaning coils, lubrication and similar.
- Responsible for preventative/corrective maintenance of transportation equipment (cars, trolleys, forklifts, etc)
- Support Maintenance and Engineering on the development and deployment of process/equipment improvements at the operation.
- Responsible for the execution of assigned Preventive Maintenance (PM) and Corrective Maintenance (CM) activities in accordance with manufacturer specifications or internal protocols.
- May assist with ordering of spare parts, maintaining spare parts inventories, and coordinate repair activities with specialized service providers.
- Comply with all regulatory related standard requirements.
- Stop further processing in the event of encountering non-conforming product condition.
- May support Maintenance Technician with routine preventative maintenance activities on manufacturing equipment.
- Troubleshoot and repair of electrical, mechanical, plumbing, carpentry and hydraulic equipment of building equipment.
- Monitor the quality and escort maintenance work performed by outside contractor working on elevators, high security gates systems, fire alarm systems, central plant systems and
- Assists with testing, inspection, implementation and maintenance of utilities, systems and structures.
- Follows Standard Precautions using personal protective equipment as required.
- Performs safety checks to comply with regulatory codes.
- Work from engineering schematics mechanical, electrical and/or follow document assembly procedures.
- Work from verbal instructions.
- Comply with documentation requirements/procedures.
- Must be able to work flexible hours.
- Communicate problems and/or any suggestions to the supervisor
- Ability to work with outside contractors
- Educational Level and Special Training Required
- Technical Certificate in industrial maintenance, electromechanical systems, electrical or mechanics or equivalent field
- Jr High School certificate
- Active driver license with forklift training/certification
- Work Experience Required
- 3-5 years of experience in repair of facilities equipment related field.
- Technical school apprenticeship or related experience.
- Qualifications and Skills
- Blueprint/Schematic Reading
- Computer literate
- Operate small hand tools (e.g. pliers, screwdrivers, hammer, wrenches, etc.), power tools and basic measuring equipment.
- Forklift operation
- Basic math, measuring and writing skills
- Physical Requirements
- Worker may be exposed to chemicals
- Exposure to medically controlled environment
- Subject to changes in procedures or work environment
- Protective equipment is required, as indicated by area procedures
- Prolonged standing and/or walking
- Heavy work: Exerting up to 80 lbs. of force occasionally to move objects
- Near Acuity: Ability to see at least 20 inches or more
- Adaptability to situations requiring the precise attainment of set standards
- Noise level is usually moderate
-
Flexographic Machine Technician
hace 1 semana
Stryker Corporation Tijuana, México**Why join Stryker?**: · Our total rewards package offering includes bonuses, healthcare, insurance benefits, retirement programs, wellness programs, as well as service and performance awards - not to mention various social and recreational activities, all of which are location s ...
-
Flexographic Machine Technician
hace 2 semanas
Stryker Tijuana, México De jornada completaWhy join Stryker? · We are proud to be named one the World's Best Workplaces and a Best Workplace for Diversity by Fortune Magazine Learn more about our award-winning organization by visiting · Our total rewards package offering includes bonuses, healthcare, insurance benefits, ...
-
Técnico de Mantenimiento A
hace 3 semanas
Thermo Fisher Scientific Tijuana, México**Maintenance Technician A**: This level position have developed a trade of · expertise for machine maintenance and production equipment repairs; installs, maintains, repair hydraulic, pneumatic, electronic, mechanical and systems on all · production equipment and have the abilit ...
-
Quality Metrology Technician
hace 1 semana
Flex Tijuana, Méxicoy detalle de las actividades · Summary: The "Quality Metrology Technician" will be based in., reporting to · - Primarily responsibility for the development of test methods and procedures needed to determine the dimensional features of products, validation and production inspectio ...
-
Lead Manufacturing Engineering Technician
hace 1 semana
Thermo Fisher Scientific Tijuana, MéxicoResponsible for the optimal operation of the machinery and equipment of the molding rack department. This position operates injection molding equipment to meet quality and production demand. Develops and implements processes and methods in accordance with product specifications a ...
-
Equipment Maintenance Automation Engineer
hace 1 semana
Flex Tijuana, MéxicoThrough the collective strength of 170,000 team members across 30 countries and responsible, sustainable operations, Flex, a Fortune global 500 company, is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative produc ...
-
Technician Iii, Engineering
hace 3 semanas
CommScope Tijuana, MéxicoIn our 'always on' world, we believe it's essential to have a genuine connection with the work you do. · **Engineering Technician III (Técnico programación de máquinas de SMT)**: · Technology is reshaping the way we live, learn and thrive In this "always-on" world, we believe it ...
-
Npip Technician
hace 3 semanas
Bose Tijuana, MéxicoJob Description · Job Profile Summary · **Responsibilities**: · - Feedback to the NPIP team all issues found during the NPIP builds add these actions in the run report. · - New product introduction (NPI) technician in charge of SMT programs, profiles and recipes creation for all ...
-
Injection Molding Process Technician-work Location
hace 1 semana
Plastikon Industries Tijuana, México**This opening position is at Plastikon Industries located in Hayward, California, USA.** · **Plastikon will support and sponsor a work visa if you are selected for the position.** · The Process Technician is responsible for set up, test, and adjust manufacturing machinery or equ ...
-
Maintenance Technician
hace 2 semanas
MAUSER Tijuana, México**Maintenance Technician Responsibilities**: · - Test and conduct preventive maintenance checks on all production equipment and machinery · - Design basic mechanical components and replace parts on machines such as bearings, filters, wiring, valves, gauges and switches · - Modify ...
-
Mechanical Design Engineer
hace 2 semanas
North American Production Sharing de México S.A. de C.V. Tijuana, México**Mechanical engineer optimize the performance of mechanical products, machinery, and equipment. assisting Maintenance superintendent to design mechanical products, analyze performance results, and maintain mechanical equipment and machinery.** · - Assisting Maintenance superinte ...
-
Automation & Control Engineer
hace 2 semanas
North American Production Sharing Tijuana, MéxicoRole Responsibility · Automation & Controls design Assisting Maintenance superintendent with custom made Automation Solutions and maintenance tasks. · Copy, reuse and replicate standards and control code developed by others · Installing and performing diagnostic tests on automate ...
-
Process Development Engineer Ii
hace 1 semana
Carlisle Interconnect Technologies Tijuana, México**Experience and Qualifications**: · Bachelor's degree in engineering/technical discipline, or equivalent relevant experience · 2 to 4 years in Manufacturing Engineering role in CNC operations, Swiss lathes operation experience is a must. · Track record of success operating and t ...
-
Maintenance Technician
hace 2 semanas
MAUSER Tijuana, México**Maintenance Technician Responsibilities**: · Clean and lubricate shafts, bearing, gears, and other parts of machinery · Troubleshoot/repair machinery such as slitters, collectors, high-speed welders, conveyors, and palletizers · Install and maintain pipe systems, hydraulic and ...
-
Engineer Manufacturing Process
hace 1 semana
Infineon Technologies Tijuana, MéxicoI · **n your new role you will: · 8** · - D's methodology I · - nvestigation & Activities of Customer Complains F · - mprovement Activities to reduce the Quality Rejects & Hold Lots in the different processes P · - articipate on the improvement of the Process CPK's A · - ctivitie ...
-
Production Operator Ii
hace 2 semanas
Merit Medical Systems Inc. Tijuana, MéxicoWhy Merit? · En Merit Medical, nuestra misión es desarrollar dispositivos médicos innovadores que mejoren vidas. Nuestro objetivo es integrar y desarrollar a gente que quiere construir a través de trabajo duro, en equipo y comprometido, dispositivos que salvan vidas. Juntos estam ...
-
Mechanical Design Engineer
hace 2 semanas
North American Production Sharing Tijuana, México**Job Overview**: · - Mechanical engineer optimize the performance of mechanical products, machinery, and equipment. assisting Maintenance superintendent to design mechanical products, analyze performance results, and maintain mechanical equipment and machinery.**ACTIVITIES**: · ...
-
Quality Engineer
hace 1 semana
Volex de México, S.A. de C.V. Tijuana, México**We are looking for a Quality Control Engineer.** · In this role you will work within one of our value stream AUTOMOTIVE SECTOR. A dedicated manufacturing team focused on exceeding our customers' expectations. As a quality engineer you will use your judgement and criteria to sol ...
-
IT Support
hace 3 semanas
North American Production Sharing de México Tijuana, México**Vacante para la empresa North American Production Sharing de México en Tijuana, Baja California**: · **IT Support Specialist** · - The role requires contributions to providing exceedingly reliable, scalable, secure, and cost-efficient End User IT Asset Management services. · - ...
-
IT Technician
hace 3 semanas
North American Production Sharing de México Tijuana, México**Vacante para la empresa North American Production Sharing de México en Tijuana, Baja California**: · **IT Support Specialist** · - The role requires contributions to providing exceedingly reliable, scalable, secure, and cost-efficient End User IT Asset Management services. · - ...
Flexographic Machine Technician - Tijuana, México - Stryker
Descripción
Why join Stryker?We are proud to be named one the World's Best Workplaces and a Best Workplace for Diversity by Fortune Magazine Learn more about our award-winning organization by visiting
Our total rewards package offering includes bonuses, healthcare, insurance benefits, retirement programs, wellness programs, as well as service and performance awards – not to mention various social and recreational activities, all of which are location specific.
Know someone at Stryker?
Be sure to have them submit you as a referrral prior to applying for this position. Learn more about our employee referral program
general operations (i.e., compressors, vac pumps, exhaust fans, air handlers, vents, fan coil units, water coolers, refrigerators, ice machines, etc.).
Stryker is a global leader in medical technologies and, together with its customers, is driven to make healthcare better. The company offers innovative products and services in MedSurg, Neurotechnology, Orthopaedics and Spine that help improve patient and healthcare outcomes. Alongside its customers around the world, Stryker impacts more than 130 million patients annually. More information is available at
Usuarios de profesión Flexographic Machine Technician en Tijuana
-
Jesús Alonso Leyva Flores
Mechatronic Engineer